TPE/TPR

GT Series - Supersoft TPE

1. Very low hardness. TPE for adult products requires very soft feel, generally 0-25A, or even lower than 0A. The ultra-soft hardness can provide a feeling similar to skin contact.

2. Good transparency. On the one hand, this is determined by the characteristics of the material itself. In addition, the transparent material makes the products look better.

3. Environmentally friendly and non-toxic, with little smell. TPE is basically an environmentally friendly and non-toxic material, and there is no allergy and irritation to the skin.

4. The surface is dry and not sticky, which is based on the consideration of the use experience.

 

PROPERTIES

UNIT OF MEASURE

TEST METHOD

TYPICAL VALUES

Hardness

Shore A

ASTM D-2240

5C-10A

Specific Gravity

g/cm3

ASTM D-972

0.55-0.89

Tensile Strength

MPa

ASTM D-412

3-20

Elongation At Break

%

ASTM D-412

500-3000

Melt Flow Index

g/minute

ASTM D-1238

5-50

 

Applications

XG series - Easily-Molded TPE

This series has a wide range of hardness and has the processing properties of thermoplastics and the physical properties of natural rubber. Fast cooling, easy demoulding, short processing cycle and good hand feeling. It can be bonded with hard plastics such as PP and PE, and is mainly used for garden tools, daily necessities, diving equipment, stationery, medical equipment, adult products, auto parts, etc.

 

PROPERTIES

UNIT OF MEASURE

TEST METHOD

TYPICAL VALUES

Hardness

Shore A

ASTM D-2240

0A-65D

Specific Gravity

g/cm3

ASTM D-972

0.68-1.2

Tensile Strength

MPa

ASTM D-412

2.5-25

Elongation At Break

%

ASTM D-412

300-1200

Melt Flow Index

g/minute

ASTM D-1238

0.5-25

 

Applications

XL series - Highly Rebounding TPE

This series is lightweight, environmentally friendly and halogen-free, with good hand feeling, good elasticity, and surface effects ranging from glossy to high-matte. It has good anti-aging and copper corrosion resistance. Mainly used for high-end audio equipment, MP4, mobile phone chargers and headphone cables and other wires.

 

PROPERTIES

UNIT OF MEASURE

TEST METHOD

TYPICAL VALUES

Hardness

Shore A

ASTM D-2240

65A-90A

Specific Gravity

g/cm3

ASTM D-972

0.87-1.1

Tensile Strength

MPa

ASTM D-412

6.0-20

Elongation At Break

%

ASTM D-412

500-1000

Melt Flow Index

g/minute

ASTM D-1238

1.5-10

 

Applications

XBER series - Overmolded TPE/TPR

This series of products does not need any adhesive, and can choose different models to be overmolded with PC, ABS, POM, PMMA, PA6, PA6.6, PA12 or other hard plastics. The processing is simple, the bonding is firm, and the hardness range wide, together with soft feeling, non-slip and shock-absorbing properties.

 

PROPERTIES

UNIT OF MEASURE

TEST METHOD

TYPICAL VALUES

Hardness

Shore A

ASTM D-2240

25A-85A

Specific Gravity

g/cm3

ASTM D-972

0.92-1.1

Tensile Strength

MPa

ASTM D-412

3.5-15

Elongation At Break

%

ASTM D-412

400-1000

Melt Flow Index

g/minute

ASTM D-1238

1.0-20

 

Applications

XD series - Durable TPR

This series of products has the characteristics of easy processing, easy coloring and spraying. Leftovers can be reused. Lightweight and wear-resistant, soft to touch, the surface can be selected from glossy surface to highmatte surface, and the transparency can be adjusted from natural color to full transparency. It can be combined with hard plastics such as HIPS and PS. Mainly used for shoe materials, toys, decorations, ice trays, etc.

 

PROPERTIES

UNIT OF MEASURE

TEST METHOD

TYPICAL VALUES

Hardness

Shore A

ASTM D-2240

15A-90A

Specific Gravity

g/cm3

ASTM D-972

0.9-1.1

Tensile Strength

MPa

ASTM D-412

2.0-20

Elongation At Break

%

ASTM D-412

300-1000

Melt Flow Index

g/minute

ASTM D-1238

1.5-20

 

Applications